manualshive.com logo in svg

Omron CS1 Series, Specification

Share
Download
Omron CS1 Series Specification Download Page 7

Motion Control Units

Product Specifications

6

Item

Specifications

Program and position data automatic
download function

When the operation number (program or position data) is specified by an IOWR instruction from
the CPU Unit, CX-Motion recognizes it and downloads the program or position data to the MC
Unit.

Self-diagnostic function

Memory corruption is detected.

Error detection functions

Error counter warning, error counter over, absolute encoder error detection, CPU errors,
communications errors (Teaching Box), flash memory error, EEPROM error, software limit over
error, phase-Z error, overtravel, emergency stop, unit number error, driver alarm detection,
driver reverse wiring detection, CPU Unit error detection

Error log function

Stores up to 20 error log records.

Model

CS1W-MC221

CS1W-MC421

Settings

Front panel: Rotary switches for unit number
setting (0 to 93)

Rear panel: None

Front panel: Rotary switches for unit number
setting (0 to 91)

Rear panel: None

Indicators

7 LED indicators: Running, MC Unit error,
CPU Unit error, motor rotation direction for
each axis (CCW/CW)

11 LED indicators: Running, MC Unit error,
CPU Unit error, motor rotation direction for
each axis (CCW/CW)

Connections on front panel

Servodriver connector, I/O connector,
Teaching Box connector (one each)

Servodriver connectors (two), I/O connector,
Teaching Box connector, MPG connector

Power supply voltage

5 VDC (from Backplane)

o e su

y o age

24 VDC (from external power supply)

Voltage fluctuation tolerance

4.75-5.25 VDC (from Backplane)

o age uc ua o

o e a ce

21.6-26.4 VDC (from external power supply)

Internal current consumption

600 mA or less for 5 VDC (with Teaching Box
connected: 800 mA or less)

700 mA or less for 5 VDC (with Teaching Box
connected: 1,000 mA or less)

Weight (Connectors excluded)

450 g max.

540 g max.

Safety standards

Conforms to UL (Class 2), CSA (class 2), and EC specifications.

External dimensions

130.0 

×

 35 

×

 100.5 mm (H 

×

 W 

×

 D)

Single-slot size

130.0 

×

 70.0 

×

 100.5 mm (H 

×

 W 

×

 D)

Double-slot size

Standard accessories

10136-3000VE snap-on connector for
Servodrivers and 10336-52F0-008 Connector
Cover (manufactured by Sumitomo 3M): 1 set

10126-3000VE snap-on connector for I/Os
and 10326-52F0-008 Connector Cover
(manufactured by Sumitomo 3M): 1 set

Antistatic screws: 4

10136-3000VE snap-on connector for
Servodrivers and 10336-52F0-008 Connector
Cover (manufactured by Sumitomo 3M): 2
sets

10126-3000VE snap-on connector for I/Os
and 10326-52F0-008 Connector Cover
(manufactured by Sumitomo 3M): 1 set

10114-3000VE snap-on connector for MPG
and 10314-52F0-008 Connector Cover
(manufactured by Sumitomo 3M): 1 set

Antistatic screws: 8

Cat. No.

W359

Summary of Contents for CS1 Series



























Reviews:

No comments

Brands by name

Popular brands

Load more brands