7. Connection Procedure
7
The PCU Setting Window is
displayed. Select
Network
Setting
from the project tree on
the left side of the Window.
Confirm that
#17_New Slave
E3NW-ECT Communication Unit
for Digital Type Sensor 60
inputs(V1.0)
was added.
*The model and version may differ
depending on the device used.
8
Click the Remote I/O Input/Output
Memory Area Allocation List Tab
that is on the right side on the PCU
Parameter Setting Window.
Confirm that node address #17 is
displayed and the I/O Memory
Areas are set as follows:
•Input offset: 0
•Input address: 3900
•Input size: 10 bytes
•Output offset: -
•Output address: -
•Output size: 0 byte
9
Select
Verify Network
from the
Network Menu.
10
Confirm that
Matched
is displayed
on the Network Verification Result
Dialog Box, and click the
OK
Button.
22
Summary of Contents for CJ1W-NC82
Page 35: ...32...
Page 36: ...2013 0911 P562 E1 01...