manualshive.com logo in svg

Omron CJ1W-CT021, Operation Manuals, Page: 36 / 196

Share
Download
Omron CJ1W-CT021 Operation Manuals Download Page 36

  Related Manuals

34

CJ-series High-speed Counter Units Operation Manual for NJ-series CPU Unit(W492)

Related Manuals

The following manuals are related to the NJ-series Controllers. Use these manuals for reference. 

Manual name

Cat. No.

Model numbers

Application

Description

NJ-series CPU Unit 
Hardware User’s Manual

W500

NJ501-

@@@@

NJ301-

@@@@

Learning the basic specifi-
cations of the NJ-series 
CPU Units, including intro-
ductory information, 
designing, installation, and 
maintenance. Mainly hard-
ware information is pro-
vided.

An introduction to the entire NJ-series system is 
provided along with the following information on 
the CPU Unit.

• Features and system configuration

• Introduction

• Part names and functions

• General specifications

• Installation and wiring

• Maintenance and inspection

Use this manual together with the NJ-series 
CPU Unit Software User’s Manual (Cat. No. 
W501).

NJ-series CPU Unit Soft-
ware User’s Manual

W501

NJ501-

@@@@

NJ301-

@@@@

Learning how to program 
and set up an NJ-series 
CPU Unit. Mainly software 
information is provided.

The following information is provided on a Con-
troller built with an NJ501 CPU Unit.

• CPU Unit operation

• CPU Unit features

• Initial settings

• Programming based on IEC 61131-3 lan-

guage specifications

Use this manual together with the NJ-series 
CPU Unit Hardware User’s Manual (Cat. No. 
W500).

Sysmac Studio Version 1 
Operation Manual

W504

SYSMAC-
SE2

@@@

Learning about the operat-
ing procedures and func-
tions of the Sysmac Studio.

Describes the operating procedures of the Sys-
mac Studio.

CJ-series High-speed 
Counter Units Operation 
Manual for NJ-series 
CPU Unit (This Manual)

W492

CJ1W-CT021

Learning about the func-
tions and usage of CJ-
series High-speed Counter 
Units for using it in an NJ-
series configuration.

The functions and usage of the CJ-series High-
speed Counter Unit for using it in an NJ-series 
configuration are described.

CJ-series High-speed 
Counter Units Operation 
Manual

W401

CJ1W-CT021

Learning about the func-
tions and usage of CJ-
series High-speed Counter 
Units.

The functions and usage of the CJ-series High-
speed Counter Unit for using it in a CJ-series 
configuration are described.

Summary of Contents for CJ1W-CT021





































































































































































































Reviews:

No comments