BU
2002
RWLG/BU
3002
RWLG/BU
5002
RWLG
2
13
2-2-2. Stationary installation
Perform installation only as shown in the diagrams below.
●
Horizontal installation
Attach the included rubber feet for horizontal installation with the included M3 screws and
position the unit horizontally.
For stationary horizontal installation, make sure that this product does not slide or fall.
(Installation is possible without removing the handles on the sides of BU5002RWLG; do not
remove them.)
●
Upright installation
(1) Upright installation
Use the upright stands included with the product.
Attach the two upright stands (front and back) for BU2002RWLG and BU3002RWLG, and
three (front, center, and back) for BU5002RWLG with the included screws.
Keep a space of 250 mm or more above the UPS.
(Installation is possible without removing the handles on the sides of BU5002RWLG; do not
remove them.)
ESC
ES
C
Note
The batteries for BU5002 G are in a separate package. Attach the
batteries to the unit before installation. For the attachment procedure, refer to
"6-2 Replacing the battery".