manualshive.com logo in svg

Omnivision CameraChip OV9650, Implementation Manual

Share
Download
Omnivision CameraChip OV9650 Implementation Manual Download Page 53

Prototyping and Evaluation Modules

Version 1.1,  December 7, 2004

Proprietary to OmniVision Technologies

53

O

mni

ision

11 Prototyping and Evaluation Modules

OmniVision Technologies Inc. supplies prototyping and evaluation modules to demonstrate 
operation of the associated C

AMERA

C

HIP

 products, as well as to demonstrate associated 

companion backend processor, where required.

11.1 OV9650EAA Prototyping Module

The OV9650EAA prototyping module is used for general design-in and evaluation purposes. The 
module provides a simple 32-pin header-connector interface to the relevant I/O and control 
registers in the OV9650 C

AMERA

C

HIP

. The module includes the necessary sensor, lens/holder, a 

few capacitors, and resistors.

The OV9650EAA prototyping module can be directly connected to any companion backend 
processor solution or system interface. The header-connector interface allows for access to the 
10-bit digital output data, PCLK, vertical sync, horizontal sync and SCCB signals. The backend 
interface can use the Serial Camera Control Bus (SCCB) interface software to adjust the control 
register values.

11.2 OV9650ECX USB 2.0 Evaluation Module

The OV9650ECX USB2.0 evaluation module is provided so that potential customers may evaluate 
both the live video function of the C

AMERA

C

HIP

 as well as the SCCB control interface software. The 

OV9650 C

AMERA

C

HIP

 output is a RGB raw data or YUV stream connected to a USB 2.0 controller 

operating at a high-speed bus data rate (480 Mbps).

Using a high performance computer system with a USB 2.0 host (cannot guarantee for every 
system), the OV9650 USB module will stream video in SXGA format (1280x1028 at 15 fps), VGA 
format (640x480 at 30 fps) or in QVGA format (320x240 at 60 fps). This configuration requires a 
Windows

®

2000 or XP operating system. Additionally, the SCCB software allows the evaluator to 

adjust the image characteristics in real-time.

12 Lens selection

The OV9650 is a quarter-inch format C

AMERA

C

HIP

 that is compatible with numerous lenses in the 

market. The key considerations in lens selection are lens quality and resultant cost. OmniVision 
Technologies, Inc. has qualified several lens suppliers for the various formats, sizes, and quality of 
lenses available. OmniVision has developed a Lens Supplier Partner List to complement our 
C

AMERA

C

HIP

 products. This listing is available at 

http://www.ovt.com

 on the Partners page. Contact 

your local OmniVision FAE for recommended OV9650 lenses.

13 OV9650 Bug List

None as of this revision.

Summary of Contents for CameraChip OV9650

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands