19
Loosen the tightening screws on the headshell and move the system forwards or backwards until you reach
the desired position.
Make sure that you tighten the screws before you operate the device again.
10. CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free cloth moistened with any good
glass cleaning fluid. Never use alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
11. TECHNICAL SPECIFICATIONS
Type:
3-speed full manual turntable
Drive-method:
Quartz-controlled direct-drive
Motor:
Brushless DC-motor
Speed:
33 1/3 RPM, 45 RPM and 78 RPM
Change-time between the speeds:
33 <-> 45 RPM in < 1 sec.
33 <-> 78 RPM in < 1 sec.
45 <-> 33 RPM in < 1 sec.
45 <-> 78 RPM in < 1 sec.
Rotation-direction:
Forwards/backwards
Pitch adjustment:
± 10 % or ± 20 % via fader
Initial torque:
> 2.1 kg/cm
Wow & Flutter:
< 0.20 % WRMS
Start time:
< 1 sec.
Brake:
Electric brake
Stop time:
< 1 sec. (¼ rotation)
Rumble:
50 dB DIN B
Platter:
Outer diameter 320 mm
Weight 782 g
Tonearm:
S-shape with Cardan’s suspension
Tonearm-length:
234 mm
Adjusting the tonearm-height:
8-10.5 mm
Overhang:
20 mm
Adjustable stylus-pressure
0-4 g
Anti-Skating-range:
0-7 g
Power supply:
230 V/50 Hz
115 V/60 Hz
Power consumption:
15 W
Connectors:
1 RCA output-socket for Beatcounter
One 6.3-mm-remote-start-socket
Dimensions:
450 x 352 x 148 mm
Weight:
13 kg
Please note: errors and omissions for every information given in this manual excepted. Every
information is subject to change without prior notice 2/00 ©
