OmniSTAR 5220HP, User Manual

Page: 56 / 83

OmniSTAR 5220HP User Manual
Issue 1.32 12/2010
56
$JHP,SEED, lat,lon,hgt
With this command the user can seed the OmniSTAR algorithm with
a position, to speed up initialization. “lat” and “lon” are the user’s
latitude and longitude in degrees(decimal) and “height” is in meters.
When the current receiver position is greater than 12 meters (in the
horizontal plane) from the seed position, the receiver responds with:
$>JHP,SEED,Current Position Too Far From Seed
and aborts the command
Note that the saved seed-positions are not affected by neither
•
the power-off/on of the receiver
•
the command $JRESET
•
the command $JHP,SEED,lat,lon,height
(if too far from user’s position)