OmniSTAR 5220HP, User Manual

Page: 20 / 83

OmniSTAR 5220HP User Manual
Issue 1.32 12/2010
20
Getting started
The purpose of this section is to get you started with the 5220HP as quickly as
possible.
Configuration
Generally, when the receiver is supplied, it will be configured for the mode and
data link(s) you have subscribed to. In most cases getting up and running will
be a easy as connecting the appropriate cables and applying power to the
system.
Configuring the receiver via direct commands will be treated later in the
section “Communication with the Receiver”
If at any time you need to return the menu system to the factory default
configuration, simply hold down the “enter” key on power-on until the splash
screen disappears.
Installation
Before operating the receiver for the first time, ensure that the installation
instructions (below) have been followed correctly.
1. Mount the 5220HP receiver in a suitable place (see page 16).
2. Mount the OmniSTAR Aero-06 antenna in a suitable place (see page 17).
3. Connect the antenna to the receiver using an antenna cable, making sure
that both connectors are secured well. Secure the antenna cable using tie
wraps.
4. Connect the data cable to port A of the 5220HP receiver.
5. Connect the receiver to a suitable (8-36 V DC) power supply using the
powercable.