OmniSTAR 5220HP, User Manual

Page: 30 / 83

OmniSTAR 5220HP User Manual
Issue 1.32 12/2010
30
L-Band D
Signal Status D
Displays status and location of the correction
satellite form current position
Freq: 15xx.xxxx Frequency of used correction satellite
SPS: 1200 Data rate of used correction satellite
BER: 500.... 0 Bit Error Rate of used satellite (500 is
no lock, 0 is perfect reception)
L
n
: xx.x
o
Longitude of Omnistar Satellite on
equator.
Elev: xx.x
o
Elevation above horizon in degrees
Az : xx.x
o
Azimuth of correction satellite
Configure D
Configures the correction satellite
Mode I Auto Frequency selection mode
. Freq 15xx.xxxx Frequency of the current satellite
L
t
xx
o L
n
xx
o
Centre point for reference stations of
a satellite in latitude and longitude
The Auto Mode will select the satellite
with the closest centre point
Subscription D
Displays information about your subscription
Begin : 01/06/1980 Start date of the subscription
End : 12/31/2012 End date of the subscription
Optns : XP can be HP or XP
Type : XP can be HP or XP
Lib : HP 4.28L1 HP engine firmware version 4.28
Src : 5 4 = HP ; 5 = XP
Enter code I upgrade codes can be entered here
Diff D L-Band
Chosen differential source is L-Band
(OmniSTAR) Other options are:
Autonomous Standard GPS
Extern RTCM External RTCM input
L-Band OmniSTAR