4.
Installation
5
www.sinetech.co.za
4.
Installation
4-1. Selecting Mounting Location
Consider the following points before selecting where to install:
•
Do not mount the inverter on flammable materials.
•
Mount on a solid surface
•
This inverter can emit noises during operation which may be perceived as a nuisance
in a living area.
•
Install this inverter at eye level in order to allow the LCD display to be read at all
times.
•
For proper air circulation to dissipate heat, allow a clearance of ± 20 cm to the side
and ± 50 cm above and below the unit.
•
Dusty conditions on the unit may impair the performance of this inverter.
•
The ambient temperature should be between 0°C and 40°C and relative humidity
should be between 5% and 85% to ensure optimal operation.
•
The installation position is to be vertical.
•
For proper operation of this inverter, please use appropriate cables for grid
connection.
•
The pollution degree of the inverter is PD2. Select an appropriate mounting location.
Install the solar inverter in a protected area that is dry, free of excessive dust and
has adequate air flow. Do
NOT
operate it where the temperature and humidity is
beyond the specific limits. (Please check the specs for the limitations.)
•
Installation position should not impede access to the connections.
•
This inverter is designed with a rating of IP20 for indoor applications only.
•
Regularly clean the fan filter.
4-2. Mounting Unit
Wall mounting should be implemented with the proper bolts. The device should be
bolted on securely.
The inverter can only be used in an ENCLOSED ELECTRICAL OPERATING AREA. Only
service personnel should enter this area.
WARNING!!
Remember that this inverter is heavy! Please be careful when lifting.
WARNING!!
FIRE HAZARD.
MOUNT ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACES ONLY.
