Omnicomm LLS-Ex 5, User Manual

Page: 17 / 33

“Baud rate” – select the rate for data exchange with external devices. Default value –
19,200 bit/s.
Installation and Connection
When installing the fuel level sensor onto the plastic fuel tank it is important to provide a
secure electrical connection between the sensor's body and the frame of the vehicle. If
this condition isn't met, it can lead to sensor malfunction caused by static electricity.
For installation onto cylindrical fuel tanks with the diameter 420...710 mm follow the
instructions in the section
Fuel level sensor installation recommendations for cylindrical
fuel tanks .
1. Put the vendor furnished mounting point gasket on the Omnicomm LLS-Ex 5 sensor
measuring probe
2. Put the Omnicomm LLS-Ex 5 sensor into the tank and fix it:
when securing with bolts, first put on a spacer and a spring washer
when securing to a plastic tanks with a wall thickness over 3 mm, use vendor furnished
self-tapping screws
3. Connect the Omnicomm LLS sensors to an external device:
Omnicomm LLS-Ex 5 according to the scheme:
17
Installation and Connection