Omnicomm LLS-Ex 5, User Manual

Page: 10 / 33

Preparation
Fuel Tank Preparation
1. Select the location for Omnicomm LLS-Ex 5 sensor installation subject to the following
requirements:
Installation location should be as close as possible to the geometric center and placed
at the deepest level of the tank:
When installed, the sensor should not be in contact with reinforcement ribs and
auxiliary equipment inside the tank
Installation of two sensors in one fuel tank allows for significant reduction of the fuel
level dependence on the vehicle inclination angle:
2. Steam out the tank to ensure compliance with the safety rules
3. Drill out the central bore by bimetal core drill ø35 mm
4. Drill out four mounting holes according to the diagram:
10
Preparation