Measurement time period, s
1
Overall dimensions, mm
78×74×(24+length of the
measuring probe)
Weight, kg
Not more than 2
Average service life, years
8
Parameters
Value
Preparation
Fuel Tank Preparation
1. Select the location for Omnicomm LLS sensor installation, taking into account the
following requirements:
The installation location should be as close to the geometric center as possible and
be placed at the deepest level of the tank:
When installed, the sensor should not be in contact with reinforcement ribs and
existing equipment inside the tank
Installing two sensors in one fuel tank allows to significantly reduce the de-
pendence of the fuel level on the vehicle inclination angle:
Preparation
Omnicomm LLS-AF 4 Fuel Level Sensor
6
