Installation and Connection
1. Put the mounting point gasket (included in the kit) on the Omnicomm LLS sensor
measuring probe
2. Put the Omnicomm LLS-AF 4 sensor into the tank and secure it:
when securing with rivets, use a rivet gun (riveter)
when securing with bolts, first put a seal (one on each bolt), a spacer and a spring
washer
when securing onto a plastic tank with wall thickness of more than 3 mm, use the
self-tapping screws and a seal (one on each self-tapping screw), included in the kit
3. Connect the Omnicomm LLS sensors to an external device as shown in the diagram:
Name of signal
Wire Color
Analog-frequency output
Green
Power plus
Brown
Installation and Connection
Omnicomm LLS-AF 4 Fuel Level Sensor
11
