Test Procedures
24
Reduced Pollution Certificate (RPC) - (Category B only)
The RPC menu is only shown if category B has been selected previously. Select RPC
1, 2, 3, 4 or No RPC for standard MOT tests. RPC limits for 1, 2, 3 and 4 are explained
in relevant RPC test instruction manual.
Oil Temperature Measurement (Category A only)
This selection ‘Measure Oil Temp’ will only appear on Category A tests. The MOT
FAS test prefers that Oil Temperature is measured.
Press the tick key for YES.
Follow the instructions given in section ‘Engine Oil Temperature Sensor Probe’
paying particular attention to the use of the probe and the relevant warnings.
WARNING: Incorrect use may result in damage to both user and vehicle.
The minimum oil temperature required for the test to proceed is 60°C, however the
user has the option to wait for a higher temperature before proceeding. Once oil
temperature is recorded the user is prompted to remove the probe, replace the
dipstick and confirm this before the test will continue.
WARNING: Do not rev/accelerate the engine with the temperature probe
inserted into sump as increased vibration may cause it to move and cause
damage.
Summary of Contents for OmiSmoke
Page 2: ......
