Getting Started
15
Getting Started
PC Based Systems
System requirements
The minimum PC system requirements to load the OmiGas/OmiSmoke Techcenter
software are:
•
Windows 98, ME, 2000 or XP
•
Pentium 133 processor or higher
•
32 MB RAM
•
10 MB of free disk space
•
1024 X 768 minimum screen resolution
•
CD ROM drive
•
Serial com port capable of 115200 baud rate
•
USB 1.1 or later
Loading software
Full instructions on loading the software are included with the software CD.
To load the software onto your machine, first insert the CD into the drive. The program
should then auto-run. If it doesn’t, select ‘Run’ from the ‘Start’ menu and browse to
the appropriate CD drive and select the file ‘Setup.exe’ to start the installation
process. Follow the on-screen instructions to complete the loading sequence, then
reboot when prompted.
Battery Charging
The smokemeter is designed to run for intermittent operation on an internal 12V
200W battery, or using the AC adapter if prolonged supply operation is required. The
smokemeter can be charged when not in use by leaving the AC adapter (battery
charger) connected.
1.
Ensure charger is switched off before connection to the smokemeter.
2.
Connect the charger power lead to the battery charger XLR socket.
3.
Connect the charger to the mains supply and switch on.
4.
After charging, ensure the battery charger is switched off before disconnecting.
Note: The battery charger is designed to revert to a ‘trickle’ charge mode after the
battery has been fully charged. It is safe, therefore to leave the charger attached
during a normal working day.
Do not leave the AC adapter/ battery charger connected for prolonged
periods.
Summary of Contents for OmiSmoke
Page 2: ......
