Omicron CMC 356, User Manual

Page: 71 / 142

Technical Data
71
6.10.4 Measuring Currents
Since the analog inputs of the CMC 356 are voltage inputs, current
measurement has to be performed using suitable active current clamps with
voltage outputs or shunt resistors.
OMICRON offers the C-PROBE1 as a suitable current clamp (refer to
section 9.5, "Current Clamp C-PROBE1" on page 112). The C-PROBE1 is
not included in the scope of delivery of option ELT-1 and thus has to be
ordered separately.
For further information, please contact OMICRON electronics (refer to
section "Contact Information / Technical Support" on page 137).