8 |
P a g e
DIP Switches
Figure 2.2
–
ZW-ED DIP Switch Detail
The ZW-ED has two banks of DIP switched located near the battery holder, inside
of the unit, for easy configuration.
Figure 2.2
shows a close up view of the switches. To
change the DIP switches, use a tweezer or small screwdriver to gently push the switch.
Do not apply excessive force.
Setting the Network ID:
The set of 4 switches, labeled Network ID in
Figure 2.2,
set the Network ID. The
Network ID (or NID) identifies which Receiver the ZW -ED will communicate with. If
there are multiple Receivers deployed in the same area each one must have a unique
NID. Make sure the same NID is selected on each of the End Devices you wish to
monitor from a single Receiver. Record the NID in the Net Addr. field of the User
Configuration Label for future reference. (See
Figure 2.1
.)
Table 2.2
–
Network ID
Caution:
The NID may be set with a different set of switches on your Receiver.
Please refer to your Receiver user manual to determine which switches
correspond to the NID.
Switch
NID
PID
8
7
6
5
OFF
OFF
OFF
OFF
0
13106
OFF
OFF
OFF
ON
1
13107
OFF
OFF
ON
OFF
2
13108
OFF
OFF
ON
ON
3
13109
OFF
ON
OFF
OFF
4
13110
OFF
ON
OFF
ON
5
13111
OFF
ON
ON
OFF
6
13112
OFF
ON
ON
ON
7
13113
Switch
NID
PID
8
7
6
5
OFF
OFF
OFF
OFF
8
13114
ON
OFF
OFF
ON
9
13115
ON
OFF
ON
OFF
10
13116
ON
OFF
ON
ON
11
13117
ON
ON
OFF
OFF
12
13118
ON
ON
OFF
ON
13
13119
ON
ON
ON
OFF
14
13120
ON
ON
ON
ON
15
13121
