28
3.5.2 Changing TCP/IP Properties on Your Computer
Go to your computer’s
Control Panel
then
Network Connections
.
Pick the network with the proper Ethernet card. Right click and choose
Properties.
Figure 3.2 Network Connections
Setup the IP address (in this case,
192.168.1.1
) as shown below and press OK.
Figure 3.3 Network Connections
Look for
Internet Protocol Version 4
(TCP/IPv4),
click on it and press
Properties
You can access the Coordinator’s web
server via any internet browser using IP
address of
192.168.1.200.
Once you log into the Coordinator’s
web server, you will be able to change
its IP configuration according to
Section 4.2.
After you configure the
Coordinator’s IP configurations,
you should go back and set
your PC’s previous IP settings.
