NOTE:
7.4 Connector/Transmitter Operation
7.4.1 Button Operation
(1.) “PRESS ON/OFF”
The “PRESS ON/OFF” button on the front of your connector/transmitter is used
to turn your unit “ON” or “OFF”
(2.) “PRESS SETUP”
The “PRESS SETUP” button on the front of your connector/transmitter is only
used during the setup and configuration of your unit. See Section 4.1.2 for more
information.
Figure 7-2. Connector/Transmitter Button Operation
7.4.2 Ambient Temperature Readings
The ambient temperature reading displayed on your screen when running the
TC-Central program, is the actual ambient temperature that your
connector/transmitter is being exposed to. This reading is only provided as
reference and to aid you in proper installation of your unit. The ambient
temperature reading will blink and change to RED digits to alert you that your
have exceed the maximum recommended safe operating conditions for your
connector/transmitter. You should not rely on this feature as sole protection.
Additional protection should be taken by you “the user” to protect your unit
from extreme conditions.
Operating your connector/transmitter outside the specified ambient conditions
listed in Section 9 of this manual may cause your unit to malfunction and stop
working correctly.
7.4.3 Indicator Lights
(1) Transmit (TX) Green Indicator Light
The green indicator light marked “TX” on the front of the connector/transmitter
will blink every time the unit sends data to the receiving unit. Example; If you
selected a 5 sec sample rate the green TX led will blink one time every 5 seconds.
(2) Low Battery (Low Bat) Red Indicator Light
The red indicator light marked “Low Bat” on the front of the
connector/transmitter will turn on when the battery reaches a level at or below
the power level required for normal operation. When this indicator turns on it’s
time to install a fresh battery in your unit. For procedures on how to change your
battery see Section 4.5. For information on battery life see Section 6.11.
1
2
®
TX
UNIVERSAL WIRELESS THERMOCOUPLE CONNECTOR
LOW BATT
PRESS
SETUP
PRESS
ON/OFF
UWTC
7-2
System Operation
7
Summary of Contents for UWTC-RPT1
