4
e. Exit the "SETUP" mode
Once you have successfully programmed your connector/transmitter you
can disconnect the USB cable and press "SETUP" button on the device once
to exit the "SETUP" mode.
4. Configure Receiver
UWTC-REC3 Users:
Refer to Manual M4620 for configuration of this UWTC
receiver.
For other receivers, complete the following procedure. Your UWTC-REC
receiver must be connected to a USB port on your PC.
a. Launch the UWTC-REC setup utility program on your PC. You can access it
through the “Programs” list under your “Start Menu”. Scroll through the list
to find the “UWTC Configuration” folder, and then select the UWTC-REC
program.
b. After starting the setup utility program, a configuration wizard will appear
and guide you through steps to configure your UWTC-REC receiver.
Setup Instructions
3
