![background image](http://html1.mh-extra.com/html/omega/sp-014/sp-014_user-manual_4189709009.webp)
9 |
P a g e
•
Device Address:
If your Smart Interface is part of a Network, enter the Network Address here. The default network
address is 1 for most devices. Please refer to the manual of your Smart Interface for more
information.
Note:
The default Device Address is 1.
•
Device IP or Port:
The COM port number that your device is connected to on your computer.
Important:
The following parameters should
NOT
be changed. These settings should
NOT
be changed unless the
configuration has been done on the interface.
•
BaudRate:
Controls bits per second
•
DataBits:
The number of ‘bits’ in each character sent.
•
Parity:
A means of checking correctness of character by adding an extra ‘bit’ to the character and setting the value
based on all the other bits in the character.
•
StopBits:
The number of ‘bits’ used to indicate the end of the character.
Once you have completed setting the communication parameters for your device, click
Finish
.
4.3
Process Inputs Interface
The SP-014 can accept up to three 0-24 mA or 0-1.0 VDC process inputs. To customize your process inputs, follow these
steps:
Step 1:
Click the
Inputs
configuration tab on SYNC and choose your input type from the
Type
dropdown.
Step 2:
Choose between mA and mV from the Device Range/Type drop down.