16 |
M 5 7 5 1
The DIN 0 / Pulse A input pin may also be configured for low-level mV input signals. The four selectable ranges
determine the
turn-on threshold (TH)
and the
turn-off threshold (TL)
which are used to set the ACTIVE level of
the digital input.
5.3.2 Mixed Input Interface
When set to the mixed input mode, the SP-013 can accept one process signal and one digital pulse input. To
configure the digital pulse and process inputs, follow these steps:
Figure 17: SYNC interface digital and process configuration with general DIO
Step 1:
Click the
Inputs
configuration tab on SYNC and choose the
Digital, Process
or
Digital, Process,
DIO
type from the
Type
drop-down.
Step 2:
For each respective channel, select the type of digital or process input in the
Device
Range/Type
drop-down. Click
Apply Settings
when done.
For additional information regarding pin wiring for the single digital and single process mixed mode, refer to
the wiring diagrams on page 8.
Setting High Threshold
(ON)
Low Threshold
(OFF)
100 mV
75 mV
37.5 mV
500 mV
375 mV
187.5 mV
1.0 V
0.75 V
DC
0.375 V
DC
2.0 V
1.5 V
DC
0.75 V
DC
Figure 16: Active High/Low Threshold example
