![background image](http://html2.mh-extra.com/html/omega/sp-003/sp-003_user-manual_4187997019.webp)
19 |
M 5 7 4 8
is created, select the alarm in question on the left side of the alarm panel and click the delete icon
.
6
Pairing a Sensing Device to an Omega Link Gateway
Refer to either the Wired or Wireless instructions to pair an Omega Link Smart Probe & Interface to an Omega Link
Gateway. Before continuing to the pairing instructions, ensure the following prerequisites are met:
•
Ensure that the Omega Link Gateway has been properly setup, powered on, and in close physical proximity.
•
(
For Wired pairing
) Ensure the user has access to a PC and the internal Gateway UI (
refer to the Omega Link
Gateway manual for instructions on how to access the internal Gateway U
I).
6.1
Wireless Pairing
Pairing a wireless Smart Interface (IF-006) with probe attached is made easy with a one-button pairing system
between the IF-006 and the Omega Link Gateway.
Step 1:
When the Smart Probe and relevant accessories have been securely connected to the IF-006, push the
pairing button once on the IF-006. The LED status indicator will blink green indicating the device is in Pairing
Mode.
Step 2:
Quickly push the pairing button on the Omega Link Gateway. The LED on the Gateway will blink green
indicating the Gateway is in Pairing Mode.
When the IF-006 or Smart Sensor has been successfully paired to the Omega Link Gateway, the LED will stop
blinking on both devices. Readings for the newly added device will then appear on the Omega Link Cloud or OEG
interface.
6.2
Wired Pairing
Wired Smart Probes connected directly to an Omega Link Gateway with an IF-001 cable or IF-002 will need to be
added to the Gateway Internal User Interface. The
Connected Devices
tab is the default page set once you are
signed in to the internal gateway UI. From here, you can add devices to your gateway to have them appear in your
Omega Link Cloud account.
Figure 84: Gateway Internal User Interface
To add a device to your gateway from the internal gateway web UI, begin by clicking the
button at the top
right of the web page. Fill out the Add Device menu with the parameters of the Smart Probe connection.