16
Technical Information
9.I FEEL button
Press this button to start I FEEL function and " " will be displayed on the remote controller. After this function is set, the remote
controller will send the detected ambient temperature to the controller and the unit will automatically adjust the indoor
temperature according to the detected temperature. Press this button again to close I FEEL function and " " will disappear.
● Please put the remote controller near user when this function is set. Do not put
● Sleep3- the sleep curve setting under Sleep mode by DIY could be inquired:
The user could accord to sleep curve setting method to inquire the presetting sleep curve,
enter into user individuation sleep
setting status, but do not change the tempera-ture, press “Turbo” button directly for confirmation. Note: In the above presetting or
enquiry procedure, if continuously within 10s, there is no button pressed, the sleep curve setting within 10s, there is no button
pressed, the sleep curve setting status will be automatically quit and resume to display the original displaying. In the presetting or
enquiry procedure, press
"ON/OFF" button, "Mode" button, "Timer" button or "Sleep" button, the sleep curve setting
or enquiry status will quit similarly.
Press this button to set clock time. " " icon on remote controller will blink. Press "▲" or " " button within 5s to set clock time.
Each pressing of "▲" or " " button, clock time will increase or decrease 1 minute. If hold "▲" or " " button, 2s later
,
time will change quickly. Release this button when reaching your required time.
Press "CLOCK" button to confirm the time. " " icon stops blinking.
Note:
● Clock time adopts 24-hour mode.
● The interval between two operation can’t exceeds 5s. Otherwise, remote contro-
ller will quit setting status. Operation for
TIMER ON/TIMER OFF is the same.
11.CLOCK button
▲
▲
▲
Note:
● Under on and off status, you can set TIMER OFF or TIMER ON simultaneously.
● Before setting TIMER ON or TIMER OFF, please adjust the clock time.
● After starting up TIMER ON or TIMER OFF, set the constant circulating valid.
After that, air conditioner will be turned on or turned off according to setting time.
ON/OFF button has no effect on setting. If you don’t need this function, please use remote controller to cancel it.
temperature or low temperature in order to avoid detecting inaccurate
the remote controller near the object of high
When I FEEL function is turned on, the remote controller should be put within the area where indoor unit can receive the
signal sent by the remote controller.
ambient temperature.
●
TIMER ON button
"TIMER ON" button can set the time for timer on.
After pressing this button, " "
remote controller blinks. Press "▲" or
icon disappears and the word "ON" on
" " button to adjust
TIMER ON setting.
After each pressing "▲" or " " button,
TIMER ON setting will increase or decrease 1min. Hold "▲" or " " button, 2s
later , the time will change quickly
until reaching your required time.
Press "TIMER ON" to confirm it.
The word "ON" will stop blinking. " " icon
resumes displaying. Cancel
TIMER ON: Under the condition that
TIMER ON is started up, press "TIMER ON"
button to cancel it.
● TIMER OFF button
"TIMER OFF" button can set the time for timer off. After pressing this button," "
on remote controller blinks. Press "▲" or
icon disappears and the word "OFF"
" " button to adjust
TIMER OFF setting.
After each pressing "▲" or " " button,
TIMER OFF setting will increase or decrease 1min. Hold "▲" or " " button, 2s
later , the time will change quickly
until reaching your required time.
Press "TIMER OFF" word "OFF" will stop blinking. " " icon resumes displaying.
Cancel TIMER OFF. Under the condition that TIMER OFF is started up, press
"TIMER OFF" button to cancel it.
▲
▲
▲
▲
10.TIMER ON /
TIMER OFF button
▲
▲
12.QUIET button
Press this button, the Quiet status is under the Auto Quiet mode (display " " and "AUTO" signal ) and Quiet mode
(display " " singal) and Quiet OFF (there is no signal of " " displayed), after powered on, the Quiet OFF is defaulted.
Note:
●
The Quiet function can be set up in all modes; Under the Quiet mode,the fan
speed is not available.
● When quiet function is selected:
Under cooling mode: indoor fan operates at notch 4 speed. 10 minutes later or
when indoor ambient temperature≤28
Ƈ
, indoor fan will operate at notch 2 speed
or quiet mode according to the compari son between indoor ambinet temperature
and set temperature.
Under heating mode: indoor fan operate s at notch 3 speed or quiet mode according to the comparison between indoor
ambient temperature and set temperature.
actual cooling, heating or fan mode.
Under dry, fan mode: indoor fan operates at quiet mode.
Under auto mode: the indoor fan operates at the auto quiet mode according to