17
Technical Information
14.LIGHT button
Press this button to turn off display light on indoor unit. " " icon on remote controller disappears. Press this button again
to turn on display light. " " icon is displayed.
Press this button to achieve the on and off of healthy and scavenging functions in operation status. Press this button for
the first time to start scavenging function;
button
15.
13.WiFi button
● This function is only available for some models.
Press "
WiFi
" button to turn on or turn off WiFi function. When WiFi function is turned on, the " " icon will be displayed
WiFi
on remote controller; Under status of unit off, press "MODE" and "
WiFi
" buttons simultaneously for 1s, WiFi module
will restore to factory default setting.
● The Quiet function is only available for some models.
actual cooling, heating or fan mode.
Under auto mode: the indoor fan operates at the auto quiet mode according to
16.TEMP button
By pressing this button, you can see indoor set temperature, indoor ambient temp- erature or outdoor ambient temperature
on indoor unit ’s display. The setting on remote controlleris selected circularly as below:
no display
LCD displays " ". Press the button for the second time to start healthy and
scavenging functions simultaneously; LCD displays " " and " " . Press this button for the third time to quit healthy and
scavenging functions simultaneously.
Press the button for the fourth time to start healthy function; LCD display " " .
Press this button again to repeat the operation above.
● This function is applicable to partial of models.
Energy-saving function
Under cooling mode, press "TEMP" and "CLOCK" buttons simultaneously to start up or turn off energy-saving function.
When energy-saving function is startedup, "SE" will be shown on remote controller, and air conditioner will adjust the set
temperature automatically according to ex-factory setting to reach to the best energy-saving effect. Press "TEMP" and "CLOCK"
buttons simultaneously again to exit energy-saving function.
Note:
● Under energy-saving function, fan speed is defaulted at auto speed and it can’t be adjusted.
● When selecting " " or no display with remote controller, temperature indicator
on indoor unit displays set temperature.
● When selecting " " with remote controller, temperature indicator on indoor unit displays indoor ambient temperature.
● When selecting " " with remote controller, temperature indicator on indoor unit displays outdoor ambient temperature.
Note:
● Outdoor temperature display is not available for some models. At that time, indoor unit receives " " signal, while it displays
indoor set temperature.
● It’s defaulted to display set temperature when turning on the unit.There is no
display in the remote controller.
● Only for the models whose indoor unit has dual-8 display.
● When selecting displaying of indoor or outdoor ambient temperature, indoor temperature indicator displays corresponding
temperature and automatically turn to display set temperature after three or five seconds.
● Under energy-saving function, set temperature can’t be adjusted. Press "TURBO" button and the remote controller won’t send
signal.
● Sleep function and energy-saving function can’t operate at the same time. If energy-saving function has been set under
cooling mode, press sleep button will cancel energy-saving function. If sleep function has been set under cooling mode, start
up the energy-saving function will cancel sleep function.
