Omega OMEGASCOPE OS520 User Manual Download Page 62

Page: 62 / 79

Glossary of Key Strokes

8-1

Key(s)

Key(s) Functions

•

Selects one of the following Display
Modes:

E , MAX, MIN, dIF, AVG, HAL, LAL,
AMB, PRN, or MEM.

•

Locks/unlocks the trigger.

•

Enables/disables High and Low Alarms.

•

Enables/disables Target Ambient
Temperature Compensation.

•

Enables/disables sending data to the
personal computer or serial printer.

•

Stores temperature data on command.

•

Displays previously stored data.

•

Increments the data or value displayed.

•

Turns on or off the backlighting (only in
MAX, MIN, dIF, or AVG Display Modes).

•

Decrements the data or value displayed.

•

Changes the unit of measure from °F to
°C or vice versa (only in MAX, MIN, dIF,
or AVG Display Modes).

Press and hold down the

key & then press the

key

and

keys

pressed in rapid sequence

•

Allows you to go to the Diagnostic
Routine.

•

Allows you to erase all 100 stored
temperature data from the
memory.

Summary of Contents for OMEGASCOPE OS520
















































































Search results

Summary of Contents for OMEGASCOPE OS520

Reviews:

Related manuals for OMEGASCOPE OS520

Brands by name

Popular brands

Omega OMEGASCOPE OS520, User Manual

Search results

Summary of Contents for OMEGASCOPE OS520

Reviews:

Related manuals for OMEGASCOPE OS520

Brands by name

Popular brands