8. When installation is
complete, click
Finish
to exit the
Shock Setup Wizard.
CONFIGURE DATA LOGGER
The next two steps in the setup process install a software driver
for the USB data logger, and configure the unit to your data
logging preferences.
Remove the transparent plug cap (Fig. 1, Callout E) from the data
logger to prepare it to be plugged into a USB port of your
computer.
Note that the software installation has added a
icon to your
desktop. To facilitate access to the program, right-click on the icon
and pin it to both your Start button and the Quick Start area at the
left of your taskbar. You can now eject the Shock Software mini-
disc and store it with your other important software.
Plug the data logger into an available USB port of your computer. If
your computer is a laptop and the only available USB jack does
not have enough vertical clearance to accommodate the logger
without mechanically stressing its USB plug,
do not
plug the
logger directly into the jack. You do not want the plug of the logger
to support any of the weight of the laptop. If that is the case, plug
the data logger into the jack of the included USB extension cable
and insert the plug of the extension cable into the computer’s
USB jack.
8
VB10 Manual_FINAL_080514_awb 8/5/14 12:06 PM Page 8