Temperature/Event Adapter
3
Recording Time
Sampling Rate
40 Days
15 Minutes
2 Weeks
5 Minutes
60 Hours
1 Minute
30 Hours
30 Seconds
15 Hours
15 Seconds
On Event Change
On to Off or, Off to On
Note that recording on event change is not a time related recording func-
tion.
The Service Logger will monitor the Event Detector and only make a data
recording when the status of the event detector changes from ON to OFF or
from OFF to ON.
There is also a maximum time limit between events.
If the
Service Logger does not detect a change in state for more than 45 hours the
Service Logger will assume no events are occurring and the recording will be
automatically terminated. As in the time related recording functions the display
will continuously show the status of the temperature sensor and event detector
but will only record data on a change in the state of the event detector.
When the
M E N U
E N T E R
button is pressed 3 more times (to cycle through the
remaining functions), the recording time and the sampling rate will be saved
into memory and the Service Logger will return to the operating mode.
Otherwise the unit will return to the operating mode after approximately 1
minute and changes will be saved into memory.
Changing Scale to °F or °C
Press the
M E N U
E N T E R
button until the display
reads:
or
Use the
S T A T U S
or
R E C O R D
buttons to
change the setting to the desired scale.
When the
M E N U
E N T E R
button is pressed twice more (to cycle through the
remaining functions), the temperature scale setting will be saved into memory,
and the Service Logger will return to the operating mode. Otherwise the unit will
return to the operating mode after approximately 1 minute and changes will be
saved into memory.
TEMPERATURE SET
TO FAHRENHEIT
TEMPERATURE SET
TO CELSIUS