12
THREE-PHASE ELECTRIC CONNECTION
The cookers that can also be connected to three-phase systems normally are factory built for the single-phase 230V
connection and are supplied with a power cord. Based on the connection system used, install the power cord type
indicated in table No.4.
To use the selected connection system change the jumpers on the terminal strip as indicated in the diagram of (Fig.18)
Fig. 18
APPLIANCE MAINTENANCE
ATTENTION: IMPORTANT WARNINGS
For cookers resting on a base
ATTENTION:
If the cooker rests on a base, take the measures necessary to prevent the cooker from sliding along the
support base.
For cookers with glass covers
ATTENTION:
Before opening the appliance
’s glass cover, carefully remove all liquid residues from the top of it.
ATTENTION:
Before closing the appliance
’s glass cover, make sure that the work surface has cooled.
For cookers with electric ovens
ATTENTION:
The unit becomes hot during use. Do not touch the heating elements inside the oven.
For cookers with electric ovens
ATTENTION:
The accessible parts can become hot during use. Keep children away from the appliance.
For the food warmer compartment (or drop leaf in our case)
ATTENTION:
The internal parts of the food warmer can become hot during use.
For glass doors
ATTENTION:
Do not use harsh abrasive cleaning products or metal spatulas with sharp edges to clean the oven door
’s
glass since this could scratch the surface and the glass could break.
Do not use steam cleaners to clean the appliance.
WARNING: DO NOT MODIFY THIS APPLIANCE
DOOR GUARD
The cookers with strips of stainless steel on the oven door can be equipped with a protective grating that can be installed
on the door. Such grating is available on the service post sale (Fig.43).
Fig. 43
