09
User Manual
Connection of Drain Hoses
Insert the drain hose into a drain pipe with a minimum
diameter of 4 cm, or let it run into the sink, making sure to
avoid bending or crimping it. The height of drain pipe must
be less than 1000mm. The free end of the hose must not be
immersed in water to avoid the back flow of it.
WARNING:
Ensure that the drain hose is securely fixed in either position
A or position B.
How to drain excess water from hoses
If the sink is 1000 higher from the floor, the excess water
in hoses cannot be drained directly into the sink. It will be
necessary to drain excess water from hoses into a bowl
or suitable container that is held outside and lower than
the sink.
Water outlet
Connect the water drain hose. The drain hose must be
correctly fitted to avoid water leaks. Ensure that the water
drain hose is not kinked or squashed.
Extension hose
If you need a drain hose extension, make sure to use a similar
drain hose. It must be no longer than 4 meters; otherwise the
cleaning effect of the dishwasher could
be reduced.
Siphon connection
The waste connection must be at a height less than 100 cm
(maximum) from the bottom of the dish. The water drain
hose should be fixed.
Installation Instructions
(Continued)
Counter
Ø40mm
Max. 1000mm
Drain Hose
Water Inlet
Drain Pipe
Mains Cable
Dishwasher Rear
A
B
