![background image](http://html2.mh-extra.com/html/omega/odwis6015x/odwis6015x_user-manual_5151928010.webp)
10
ODWIS6015X
User Manual
Positioning the Appliance
When positioning the appliance in your desired location,
the back should rest against the wall behind it, and the
sides should be along the adjacent cabinets or walls.
The dishwasher is equipped with water supply and drain
hoses that can be positioned either to the right or the left
sides to facilitate proper installation.
The installation position of dishwasher should be near the
existing inlet and drain hoses and power cord.
IMPORTANT:
•
Less than 5 mm between the top of dishwasher and
cabinet and the outer door aligned to cabinet.
•
If dishwasher is in stalled at the corner of the cabinet,
there should be some space when the door is opened.
•
Depending on where your electrical outlet is, you may need
to cut a hole in the opposite cabinet side.
Built-in Installation Steps
1. Begin by affixing the condensation strip under the work
surface of the cabinet, ensuring it is flush with the edge of
the work surface (refer to Positioning the Appliance).
2. Connect the inlet hose to the cold water supply.
3. Connect the drain hose.
4. Connect the power cord.
5. Position the dishwasher in the designated location
(refer to Figure 3).
6. Level the dishwasher by adjusting the rear feet using a
Philips screw at the base's center, accessible from the
front. For the front feet adjustment, use a flat screwdriver
and turn until the dishwasher is level (refer to Figure 1).
7. Install the Aesthetic Door Panel onto the outer door of the
dishwasher (refer to Aesthetic Door Panel Installation on
page 12).
8. Adjust the tension of the door springs using an Allen key,
turning it clockwise to tighten both left and right door
springs. Neglecting this step may result in damage to the
dishwasher (refer to Figure 2).
9. Secure the dishwasher in place by following one of the two
methods (refer to Figure 3):
A. For a wood work surface: Insert the installation hook
into the slot of the side plane and secure it to the work
surface using wood screws.
B. For a marble or granite worktop: Fix the side with
screws.
Cabinetry
Dishwasher
Dishwasher
Door
Minimum Space
of 50mm
600mm
Space between cabinet
bottom and floor
Electrical, drain
and water supply
line entrances
580mm
100mm
80mm
820mm
90°
90°