Figure 4-13. Utility Program - Choose Options Screen
From this screen you will select the main operating settings for your end device.
Each end device must have a different address number for
proper operation.
After making your selections click the “Next >” button to proceed and program
your settings into your unit.
(1) Backlight Options
Intensity
Here you can set how bright you want the backlighting to be when on. Keep in
mind that when used under battery power the led brightness has a direct effect
on the life of the battery. Keep to the lowest setting possible for your ambient
light conditions to conserve of battery power.
External Power
Here you can set the amount of time you want the backlighting to stay on when
activated and the unit is running on external power.
You can only set the backlighting to be “Always On” when
the unit is powered by an external power supply.
When set to 60 or 300 seconds the backlight will come on and then turn off after
the allotted time has expired.
Setup & Configuration
4
4-8
NOTE:
NOTE:
www.DataSheet.net/
Datasheet pdf - http://www.DataSheet4U.co.kr/
