![background image](http://html1.mh-extra.com/html/omega/mds-dtm-rtd-series/mds-dtm-rtd-series_user-manual_4512776023.webp)
4.4 Configuration
Connecting your meter to your computer
A USB Programming cable was included with your unit. This cable is only used
during the setup and configuration of your meter.
This cable does not remain connected during normal use.
Figure 4-6. USB Programming Cable
Connect the A-type connector to your PC and then connect
the B-type connector to the USB port on your meter.
Figure 4-7. USB Connector Location
Setup & Configuration
4
4-4
USB
NOTE:
NOTE:
www.DataSheet.net/
Datasheet pdf - http://www.DataSheet4U.co.kr/