19
BUTTON SELECTION SUBMENU:
Press
d
12)
Display flashes previous selection of
GROS
Gross or
PEAK
Peak.
Press
b
13)
Scroll through the available selection
GROS
or
PEAK
to the
selection of your choice.
Press
d
14)
Display shows
STRD
stored message momentarily and then
advances to
RDG
Reading Configuration Menu.
If
GROS
was selected, in the Run Mode pressing
b
button causes the
display to flash Gross value (value measured without zeroing of the
display).
If
PEAK
was selected, in the Run Mode pressing
b
button causes the
display to flash Peak value.
0 - 20 mA current input used for process measurement only.
For 4 - 20 mA Input select 0 - 20 mA and adjust the Input/Reading
accordingly. To adjust 4 - 20 mA input, see example under
INPUT/READING Submenu.
Summary of Contents for iLD Big Display
Page 9: ...PART 2 SETUP 2 1 Mounting Figure 2 1 Mounting 5...
Page 53: ...NOTES 49...
Page 54: ...NOTES 50...
