4.3.5 Configure Access Control (continued)
Figure 4.12 Access Control
Login Password:
This allows users to access and modify all of the iServer Home Page
menu items, except “Access Control”, which requires an Administrator password. The
default Login password is
12345678
. This password can be up to 16 alpha-numeric
case-sensitive characters.
If there is no Login Password assigned (blank box) the iServer will not require a
password to access and modify iServer Home page menu items.
Admin (administrator) Password:
This allows users to access and modify the "Access
Control" page. The default password is
00000000
. This password can be up to 16 alpha-
numeric case-sensitive characters.
If there is no Administrator Password assigned (blank box) the iServer will not require
password to access and modify "Access Control" page.
Host Name:
Refer to
Section 3.4
, DNS.
MAC Address:
This is also called Hardware address or Ethernet address, which is
assigned to the iServer at production. The MAC (Media Access Control) address is the
iServer’s unique hardware number and is not changeable.
IP Address:
The IP (Internet Protocol) address is a 32-bit number that identifies each
sender or receiver of information that is sent in packets across the Ethernet or the
Internet. The iServer’s default IP address is
192.168.1.200
. The iServer’s IP address
should be changed to fit user’s networking environment. Consult with your IT department
for obtaining an IP address.
The DHCP will be enabled in the iServer if its IP address is set to 0.0.0.0. The
DHCP can also be enabled by setting the dip switch number 3 to ON position.
ACCESS CONTROL
Login Password:
Admin Password:
Host Name:
MAC Address: 0A:0B:0C:0D:0E:0F
IP Address:
Gateway Address:
Subnet Mask:
Main Menu
Access Control
Save
Reset
0.0.0.0
00000000
12345678
255.255.255.0
192.168.1.200
eis0e0f
http://192.168.1.200
Power Recycle
24
