22
4.3.4 Sensor Parameter
• In the first column of Configuration’s page, click on
1
to view and modify sensor
parameters. See
Figure 4.9
.
You may type any ASCII characters in the first three boxes, but you must delete
the leading spaces.
Figure 4.10 Sensor Parameters
Below are some definitions of terms used in the Sensor Parameter page.
Device Name:
shows on the Configuration and Read Sensor page.
Reading Command:
Can be set as the following command.
SRTC
Read the temperature in °C.
SRTF
Read the temperature in °F.
SRHb
Read the pressure in mbar / hPa.
SRHi
Read the pressure in inHg (Mercury).
SRHm
Read the pressure in mmHg (Mercury).
SRH2
Read the humidity.
SRDC2
Read the dewpoint in °C.
SRDF2
Read the dewpoint in °F.
Display Units:
unit of Temperature in °F or °C, shows on the “
Configuration” and “Read
Sensor
“ pages.
Display Format:
Decimal
- the leading zero’s are eliminated.
Raw
- the leading zero’s remain.
SENSOR PARAMETERS
Device No. 1
Device Name:
Main Menu
http://192.168.1.200
Sensor Parameters
Update
Reset
Temperature
Reading Command:
SRTF
Display Units:
F
Display Format:
decimal
Remote Display Format:
T00.0F
Remote End Char (HEX) 0X:
0D
Offset:
( C)
0000.0
Cancel
