24 of 36
Contrast Select
The Contrast Select register allows the user to adjust the character
contrast of the LCD display to provide the best visibility for the
ambient light conditions.
To adjust the contrast, follow these steps:
Keystroke
Display
1.
From the Measure
Mode press the PRGM
key.
Top line reads “PROGRAM
MODE” and bottom line reads
“UNITS SELECT”.
2.
Press the
arrow key
three times.
Bottom line reads
“CONTRAST SELECT”.
3.
Press the PRGM key.
Top line reads “CONTRAST
SELECT” and bottom line
shows a numerical value.
4.
Press the
or
arrow
keys to increase or
decrease the contrast
value. A low number
gives maximum contrast
and a high number gives
minimum contrast.
LCD lightens or darkens
depending on the value set.
5.
Press the PRGM key.
Top line reads “PROGRAM
MODE” and bottom line reads
“UNITS SELECT”.
6.
Press the
arrow key.
Returns to Measure Mode.
If an error is made during the contrast adjustment, pressing the
key returns the display to the previous contrast setting.
Summary of Contents for HHP360 Series
Page 1: ......
