15 of 36
Display User Defined Altitude
User Defined Altitude is useful in determining elevation change
from a map elevation reference or from a survey trig marker
elevation. To set up the HHP360 to display altitude based on user
entered information, use the following steps:
Keystroke
Display
1.
Press the PRGM key.
Top line reads “PROGRAM
MODE” and bottom line reads
“UNITS SELECT”.
2.
Press the PRGM key.
Top line reads “UNITS
SELECT” and bottom line
shows current engineering
unit.
3.
Press the ▲or ▼arrow
key until “FEET” or
“METERS” is
displayed.
Top line reads “UNITS
SELECT”
Bottom line reads “FEET or
METERS”.
4.
Press the PRGM key.
Top line reads “ALTITUDE
SELECT”. Bottom line reads
“STANDARD”.
5.
Press the ▲ arrow key
once.
Top line reads “ALTITUDE
SELECT”. Bottom line reads
“REF. TO USER”.
6.
Press the PRGM key.
Top line reads “VALUE=:
00000000”. Bottom line reads
“CHANGE?:
NO”.
7.
If the value shown in
step 6 is the correct
altitude, press the
PRGM
key to accept
and the ◄ key to return
to Measure Mode.
-
OR
-
If the value shown in
step 6 is not the correct
altitude, press the ▼ key
Top line reads “PROGRAM
MODE” and bottom line reads
“UNITS SELECT”.
Top line reads “VALUE=:
00000000”. Bottom line reads
“CHANGE?:
YES”.
8.
Press the PRGM key.
Example: set altitude to
685 feet above sea level.
Top line reads “USER MODE-
FEET”. Bottom line reads
“00000000”.
Summary of Contents for HHP360 Series
Page 1: ......
