background image

About this operating manual 

Series FMG90B  

- 4 - 

 

 

0  About this operating manual 

 

  The operating manual is aimed at specialists and semi-skilled personnel. 

  Before each step, read through the relevant advice carefully and keep to the specified 

order. 

  Thoroughly read and understand the information in the section “Safety instructions”

If you have any problems or questions, please contact your supplier or contact us directly 

at: 

 

 

omega.com 

Tel: (203) 359-1660 

e-mail: [email protected]  

 
 
 

Hazard signs and other symbols used: 

 

WARNING! / CAUTION! Risk of injury! 

This sign indicates dangers that cause personal injuries that can lead to health defects or 

cause considerable damage to property. 

 

CAUTION! Electric current! 

This sign indicates dangers which could arise from handling of electric current. 

 

CAUTION! Material damage! 

This sign indicates actions which could lead to possible damage to material or environmental 

damage. 

 

ADHERE TO OPERATING MANUAL! 

 

 

NOTICE!  

This symbol indicates important notices, 

tips or information. 

 

NO DOMESTIC WASTE! 

The device must not be disposed of 

together with domestic waste. 

 

 

  Pay attention to and comply with 

information that is marked with this symbol.  

  Follow the specified instructions and steps. 

Adhere to the given order. 

  Check the specified points or notices.  

  Reference to another section, document or 

source. 

•  Item. 

 
 
 

Summary of Contents for FMG90B Series

























Reviews: