Omega FMG90B Series, User Manual, Page: 5 / 24

FMG90B Series Device description
Technical changes reserved - 5 -
1 Device description
The FMG90B series from Omega is a flow sensor without moving parts. The measurement is
performed using magnetic induction.
The FMG90B is used for measuring or metering water and electrically conductive fluids. The
compact design and independence from the intake and discharge sections allows the
FMG90B to be used under a variety of conditions.
Versions:
The FMG90B is available in different inner diameters from 0.12 in to 0.98 in.
Type plate:
You can find the type plate on the back of the FMG90B.
It contains the most important technical data.
1.1 Delivery, unpacking and accessories
All units have been carefully checked for their operational reliability before shipment.

Immediately after receipt, please check the outer packaging for damages or any signs of
improper handling.

Report any possible damages to the forwarder and your responsible sales representative.
In such a case, state a description of the defect, the type and the serial number of the
device.
Report any in-transit damage immediately. Damage reported at a later date shall not be
recognized.
Unpacking:

Carefully unpack the unit to prevent any damage.

Check the completeness of the delivery based on the delivery note.
Scope of delivery:

1x FMG90B according to the order data.

1x Operating manual.
IMPORTANT!

Use the type plate to check if the delivered unit corresponds to your order.

In particular, for devices with electrical components, check to see if the correct power
supply voltage is specified.