Omega FMG90B Series, User Manual

Page: 7 / 24

FMG90B Series Safety instructions
Technical changes reserved - 7 -
2 Safety instructions
Before you install the FMG90B, read through this operating manual carefully. If the
instructions contained within it are not followed, in particular the safety guidelines, this could
result in danger for people, the environment, and the device and the system it is connected
to.
The FMG90B corresponds to the state-of-the-art technology. This concerns the accuracy, the
operating mode and the safe operation of the device.
In order to guarantee that the device operates safely, the operator must act competently and
be conscious of safety issues.
OMEGA provides support for the use of its products either personally or via relevant
literature. The customer verifies that our product is fit for purpose based on our technical
information. The customer performs customer- and application-specific tests to ensure that
the product is suitable for the intended use. With this verification all hazards and risks are
transferred to our customers; our warranty is not valid.
Qualified personnel:
The personnel who are charged for the installation, operation and maintenance of the
FMG90B must hold a relevant qualification. This can be based on training or relevant
tuition.
The personnel must be aware of this operating manual and have access to it at all times.
The electrical connection should only be carried out by a fully qualified electrician.
General safety instructions:
In all work, the existing national regulations for accident prevention and safety in the
workplace must be complied with. Any internal regulations of the operator must also be
complied with, even if these are not mentioned in this manual.
Degree of protection according to EN 60529:
Please ensure that the ambient conditions at the site of use does not exceed the
requirements for the stated protection rating (

§ 9 "Technical data").
Prevent freezing of the medium in the device with appropriate measures.
Only use the FMG90B if it is in perfect condition. Damaged or faulty devices must be
checked without delay and, if necessary, replaced.
When fitting, connecting and removing use only suitable appropriate tools.
Do not remove or obliterate type plates or other markings on the device, as otherwise the
warranty is rendered null and void.
Special safety instructions:
Crystallizing liquids:
Liquids which crystallize when dried out can cause a malfunction of the FMG90B.

Make sure that the FMG90B is not run dry.

Prevent the crystallization of the fluid in the device by taking appropriate measures.
Further warnings that are specifically relevant to individual operating procedures or activities
can be found at the beginning of the relevant sections of this operating manual.