IMPORTANT: For the first 48 hours after a transmitter is coded to operate the system, every
time the ignition switch is turned "on", the horn will honk rapidly for two seconds, and the LED
Status Light will flash for 90 seconds. If this occurs after the initial 48 hour period, immediately
reprogram your transmitters (See Pages 17).
This Patented feature alerts you if someone has added an unauthorized transmitter to your system, and
is found only in Omega Research and Development products.
Page - 4
Concealed Transmitter Codes: Each Executive system includes two transmitters, and up to two
additional transmitters can be stored in the unit's memory for your convenience. Each transmitter has
its own unique code. Thus, no other transmitter is coded the same as yours. In fact, no one, including
the factory, can program another transmitter exactly like yours because the code is built inside the
transmitter's microprocessor and cannot be seen or copied.
Transmitter Code Jumping
TM
: Each time you press a transmitter button its signal will advance
to the next digital code in sequence. Each time the alarm receives the correct digitally encoded signal
from your transmitter, the receiver will then advance to the next digital code in sequence to match the
transmitter. Therefore, you can never transmit the same code twice, thereby preventing a code grabbing
device from operating your system.
Transmitter Battery Saver Feature: Many times transmitter batteries are prematurely exhausted
because the transmitter buttons are inadvertently pressed by objects while in a pocket or purse. The
Executive transmitter will turn itself "off" after a short period of continuous transmission, and thus
prevent drained transmitter batteries.
Transmitter Functions
U N
L O C K
UNLOCK BUTTON
Pressing the transmitter
Unlock button will
disarm the system and
unlock all of the doors.
Keyless Entry &
Security
Executive
OPTION BUTTON
Pressing the Option button for two seconds
can be used to activate remote trunk release
(vehicles equipped with power trunk
release) or other optional equipment, such
as Remote Car Starters.
Page - 5
The 3 Button Transmitter
L O C K
O
P
-
T I O N
GREEN LED LIGHT
Illuminates whenever any
transmitter button is pressed.
Instructions for programming up to 4 transmitters
to your Executive system are found on Page 17.
All Executive Keyless Entry and Security Sys-
tems can use the same Remote Transmitters. Your
system is capable of being operated by up to four
Executive transmitters, which are available from the
dealership where you purchased your system.
Your Executive system will
lock your doors upon turning the
ignition "On", and unlock them
when the ignition is turned "Off".
Your system includes a Remote
Panic feature- pressing the LOCK
button for 3 seconds will flash the
parking and dome lights, and sound
the horn.
On certain vehicles, pressing
the unlock button once unlocks
only the driver's door. Pressing
a second time will unlock all of
the doors.
LOCK BUTTON
Pressing the transmitter
Lock butto
n
will arm
the system and lock all
of the doors.
U N
L O C K
UNLOCK BUTTON
Pressing the transmitter
Unlock button will
disarm the system and
unlock all of the doors.
GREEN LED LIGHT
Illuminates whenever any
transmitter button is pressed.
Keyless Entry &
Security
Executive
Page - 6
LOCK BUTTON
Pressing the transmitter
Lock butto
n
will arm
the system and lock all
of the doors.
The 4 Button Transmitter
P A N I C
O
P
-
T I O N
L O C K
OPTION BUTTON
Pressing the Option button for two seconds
can be used to activate remote trunk release
(vehicles with factory-equipped power
trunk release) or other optional equipment,
such as Remote Car Starters.
PANIC BUTTON
Pressing the Panic button for three seconds
will engage the Remote Panic feature-
which will flash the parking and dome
lights, and sound the horn.
Your Executive system will
lock your doors upon turning the
ignition "On", and unlock them
when the ignition is turned "Off".
Instructions for programming
up to 4 transmitters to your
Executive system are found on Page
17.
On certain vehicles, pressing
the unlock button once unlocks
only the driver's door. Pressing
a second time will unlock all of
the doors.
"Arming" your E-3000
ATV
, or placing it into a state whereby an intrusion attempt will activate it,
may be done by two methods. First, the transmitter may be used to "actively" arm the system and lock
the doors, provided the ignition switch is "off" and the system is not in Valet Mode. If the system is
in Valet Mode, the transmitter will still operate doorlocks, but the system will not arm.
Second, an optional automatic method of "passively" arming the security is Automatic Last Door
Arming. This method may be selectively programmed to operate by your Executive dealer, and if
utilized, can operate in conjunction with Active Arming.
Active Arming The Security System Using The Transmitter: The system can always be armed
with the transmitter if the ignition switch is “off” and the system is not in the Valet Mode. To arm the
system after you exit the vehicle and close all doors, simply press the LOCK transmitter button once.
The parking and dome lights will flash once, the horn will honk once*, and the LED Status Light will
begin flashing, confirming that the system is arming. The doors will also lock upon arming, and the
Starter Disable circuit will prevent any attempt to start the vehicle. Three seconds after the horn honk
the system becomes fully armed, and will activate if an intrusion attempt is detected. The system may
be armed without the normal confirmation honk by pressing the transmitter's OPTION button, then
pressing the LOCK button.
Arming By-Pass: Upon active arming, if any protected circuit is inoperable, the horn will honk
three times and the parking and dome lights will flash three times**. When this occurs, protection for
* An optional electronic siren will "chirp" instead of "honking", is available from your Executive dealer.
**Although not standard, the dealer can program the system to also have this warning if a door left open.
Arming The System
Page - 7
Continued Next Page