Page - 16
particular operation only - any future normal pressing of the transmitter's buttons will produce the
appropriate horn honk confirmation (although the silent operation may be used whenever desired).
Please note that the permanent, complete elimination of the confirmation horn honks can be
accomplished by your Executive dealer upon request.
The E-3000
ATV
features a Remote Panic Personal Protection Feature. In the event of attack
or assault, or at any time you feel threatened or in need of assistance, you can utilize your transmit-
ter to activate this feature, which will honk the horn and flash the exterior and interior lights for 60
seconds. During this period the horn will honk 10 times every 10 seconds, with a 5 second pause
between each 10 second interval. This feature operates regardless of the system's status or if the
ignition switch is "on" or "off".
Remote Panic Utilizing The Three Button Transmitter: Press and hold depressed the LOCK
button for 3 seconds to activate Remote Panic. This operation also locks the doors and arms the system.
If allowed to complete the full 60 second Panic period, at the end of 60 seconds the system will stop
and reset. The car's doors will remain locked, the system will remain armed, and the LED Status Light
will flash slowly to indicate this status. If the system was in Valet Mode when Remote Panic was
engaged, the doors will remain locked, but the system will arm and the LED Status Light will be
illuminated steadily, reflecting the Valet Mode.
If you decide to stop the Remote Panic feature during the 60 second period of activation, you may
press either the LOCK button, which will leave the doors locked and the system armed; or you may press
the UNLOCK button, which will unlock the doors and disarm the system.
Remote Personal Protection
Remote Panic Utilizing The Four Button Transmitter: The four button transmitter features a
dedicated button labeled "PANIC" to activate Remote Panic, although the "LOCK" button will also
activate Remote Panic with the identical operation of the previously explained three button transmitter.
However, the four button transmitter's "PANIC" button will activate Remote Panic only - no other
system operations are affected, although the either the "LOCK" button or the "UNLOCK" button may
be used to stop Remote Panic, with the same parameters as previously explained. To activate Remote
Panic with the "PANIC" button, press it and hold depressed for 3 seconds. To deactivate Remote Panic
before the 60 second period expires, you may press any one of the "LOCK"
(which also locks the doors and arms the system); "UNLOCK" (which also unlocks the doors and
disarms the system); or "PANIC" buttons (which only stops Remote Panic and does not affect the armed
or disarmed status of the system).
Remember, Remote Panic may be activated at any time, regardless of the ignition switch position,
and also while the system is in Valet Mode.
Page - 17
Programming Transmitters To Operate Your Executive System: To use an additional or
replacement transmitter, it's unique digital code must first be added to the Executive System module's
memory. The dealership where you purchased your Executive System can provide and program
transmitters for you, or you may program the transmitters yourself. If you wish to program a
transmitter, please follow these Transmitter Programming Mode procedures carefully:
Programming Transmitters
Continued Next Page
Page - 18
1) Have all the transmitters that you wish to operate your Executive System at hand. Any time
a transmitter code is programmed into your Executive System, all existing codes are
automatically erased. This, in addition to the Automatic Transmitter Verification
TM
feature,
prevents someone from adding an unauthorized transmitter to your system.
2) Within a 5 second period, turn the ignition switch "on" five times: "on", "off", "on", "off", "on",
"off", "on", "off", then "on" again; the fifth time leaving it "on". The horn will sound briefly
to indicate that the system is ready to receive transmitter codes.
3) Within 10 seconds press the LOCK button on the first transmitter you wish to encode to the
system. The horn will honk once to indicate the transmitter's code is learned by the system.
It is only necessary to press the LOCK button, as the rest of the transmitter's functions are
assigned automatically.
4) Repeat Step 3 within 10 seconds for each additional transmitter. The system will leave
Transmitter Programming Mode when the ignition switch is turned "off", after 10 seconds of
not receiving a transmitter broadcast, or upon learning the fourth transmitter.
User Programmable Features
Your E-3000
ATV
has five User Programmable Features which may be easily configured to your
requirements as part on the Transmitter Programming Mode. Once Transmitter Programming Mode
has been accessed (described on the previous page), at the point where the first transmitter code is
entered and acknowledged, that same transmitter may be used to configure these User Programmable
Features as desired. The User Programmable Features, and their factory default settings, are:
Continued Next Page
Page - 19
1) The Doors Automatically Lock 90 Seconds After The Ignition Switch Is Turned "Off".
Default: Feature OFF; Program with the transmitter's LOCK button.
When this Feature is activated (turned ON), every time the ignition switch is turned "Off", the
doors will automatically lock 90 seconds later. You may open a door and exit the vehicle
without affecting this operation, and the LED Status Light will have no indication that the
automatic locking will occur.
2) The Doors Automatically Relock 90 Seconds After Disarming And Unlocking By Transmitter.
Default: Feature OFF; Program with the transmitter's UNLOCK button.
When this Feature is activated (turned ON), every time the transmitter is used to unlock the
doors", they will automatically relock 90 seconds later. Opening a door will not affect this
operation, although turning "On" the ignition switch will cancel the automatic relocking. The
LED Status Light will have no indication that the automatic relocking will occur.
3) The Starter Disable Will Automatically Engage 90 Seconds After The Ignition Switch Is
Turned "Off" And 90 Seconds After Disarming And Unlocking By Transmitter.
Default: Feature OFF; Program with the transmitter's OPTION button.
When this Feature is activated, the Starter Disable circuit will automatically engage 90
seconds after the ignition switch is turned "Off" and also 90 seconds after the transmitter is
used to unlock the doors, but in both cases the system will not be armed. The later may be
cancelled by turning the ignition switch "On", but upon turning the switch "Off" the former
parameter of the Feature will cause the Starter Disable to engage 90 seconds later. Please note
that when this form of automatic Starter Disable is selected, there is no indication of the
impending engagement; once the Starter Disable is engaged, however, the LED Status Light
will flash 5 times and pause as an confirmation indicator.
