GB
16
SCOPE OF SUPPLY/PART DATA
11.0 Measuring temperature in the ear
Make sure, before taking each ear temperature
reading, that the measuring sensor and the ear
canal are clean, because otherwise the reading will
be inaccurate. For ear temperature to be taken, the
plug-in attachment (see page 10, Nr. 5, Fig. 1) must
be taken off. Pull the ear gently back and insert the
measuring probe (measuring sensor) along the ear
canal, pointing towards the eardrum. Set the sliding
switch (page 10, Nr. 5, Fig.6) to the ear symbol .
Press the
[
)
)
)
)
]
button down until a double signal tone
sounds. The temperature measured will then appear
on the display. If the audio output is activated, then
the announcement of the temperature reading will
be given after the double signal tone. The symbol
stands for ear temperature measurement.
During the measurement data saving process, 3
circles will appear on the lower field of the display
indication. These circles will no longer be displayed
when the data is successfully saved, and a new
body temperature measurement reading can now
be taken.
12.0 Measuring temperature on the forehead
For measuring the forehead temperature, the plug-in attachment
(see page 10, Nr. 5, Fig. 1) must be detached. The measuring
point should be right in the middle of the forehead. Move the
sliding switch to being on the
☺
symbol setting (see page 10,
Nr. 5, Fig.6). Hold the thermometer against the forehead and
press down the
[
)
)
)
)
]
until a double signal tone sounds. The body
temperature measured will then appear on the display. If the
audio output is activated, then the announcement of the body
temperature reading will be given after the double signal tone.
The
☺
symbol stands for forehead temperature reading.
6
Fig. 1
Fig. 2
2634-09DST_M_GB_GebrAnw_Stirn_Ohrthermo_2.indd 16
27.04.09 09:11