GB
15
SET-UP MODE
10.0 Set-up mode
Step 1:
In order to get into the set-up mode, you should hold down
the button
[MEM/SET]
for around 2 seconds. Now the 12 or 24
hour setting will flash. If the
[MEM/SET]
button is now pressed
down once again, you can set the display to be on either 12 or
24 hours.
Step 2:
While the 12 or 24 hour setting is still blinking, the
[TALK/OK]
button can be pressed in order to dial in the individual displays
and then the desired setting can be set up by then pressing the
[MEM/SET]
button. The order will take place according to the
following illustrations.
Step 3:
Display SLP stands for sleep mode (stand-by mode).
SLP-OFF:
The forehead ear thermometer is set up in such
a manner that it always displays the clock mode after a
measurement has been taken or the memory has been accessed.
The
Z
Z
symbol does not appear on the display for this setting.
SLP-ON:
The forehead ear thermometer is set up in such a
manner that it is always shut off automatically about 1 minute
after the button has been pressed for the last time. In this case,
the
Z
Z
does appear on the display.
Set: 12 hr
Set: 24 hr
Set: hours
Set: minutes
Set: year
Set: month
Set: day
Set: SLP on
Set: SLP off
2634-09DST_M_GB_GebrAnw_Stirn_Ohrthermo_2.indd 15
27.04.09 09:11