55
Reading Configuration Menu
14
14.2
UNt.tMP
Enter TEMPERATURE UNIT SELECTION SUBMENU:
1) To enter TEMPERATURE UNIT SELECTION Submenu if display shows
"
UNt.tMP
"
(Second Item of
"
RdG.CNF
"
Menu).
Press ‘
RESET/ENTER
’
2) Display shows flashing
"
C
"
(default) and front display shows °C
accordingly at the bottom right side or previous temperature Unit
selection.
Press ‘
䊱
/MAX
’
3) Scroll through the 3 supported selections to the Temperature Unit of
your choice:
"
C
"
,
"
F
"
and
"
k
"
(°C, °F and °K units).
Press ‘
RESET/ENTER
’
4) Display advances to
"
dEC Pt
"
Decimal Point Setting Menu. If a change
was made, the controller will also show the
"
StOREd
"
stored message
momentarily.
14.3
dEC Pt
Enter DECIMAL POINT CONFIGURATION SUBMENU:
Press ‘
RESET/ENTER
’
5) Display shows
"
dP.ActV
"
Decimal Point Effect Selection menu.
Press ‘
RESET/ENTER
’
6) Display flashes
"
yES
"
(default) as confirming that the decimal point
position is active otherwise
"
NO
"
as independent.
Press ‘
䊱
/MAX
’
7) To scroll or select the desired effect for your setting.
Press ‘
RESET/ENTER
’
8) Display shows
"
StOREd
"
stored message momentarily then advances
to
"
Set dP
"
Decimal Point Setting menu.
Press ‘
RESET/ENTER
’
9) Display shows
"FFFFFF"
(default) no decimal point option or previous
selection of decimal point location.
Press ‘
䊱
/MAX
’
10) Scroll through the 6 available selection as
000000
,
00000.0
,
0000.00
,
000.000
,
00.0000
, and
0.00000
for the suitable choice to match your
selected input range and type.
Press ‘
RESET/ENTER
’
11) Display advances to
"
FILtER
"
Filter Configuration submenu. If a
change was made, the controller will also show
"StOREd"
stored
message momentarily.
For TC and RTD inputs. Only the following Decimal Point selections are available:
FFFFFF
FFFFF.F
FFFF.FF (least significant digit is an averaged display)
dEC.Pt
(Decimal Point)
dP.ACt V
(Decimal Point Active)
yES
NO
FFFFFF
SEt dP
(Decimal Point Setting)
FFFFF.F
FFFF.FF
FF.FFFF
FFF.FFF
F.FFFFF