12
MANUAL DATALOGGING (MAX 199 POINTS)
1. Set the sampling rate to “0” (Refer to “
Setting the datalogger sampling rate
”).
2. In the manual mode, data is logged when press and hold
ADJ
button and screen shows recorded points “00X” in the
temp. block with icon “
MEM
” flash in few seconds.
e.g.
Recorded 1st point, then bottom screen shows “001”.
3. Long press
CAL
button to clear data (Removed MANUAL.csv), screen shows “
CLr
”.
NOTE 1:
While screen shows “
Err
” by long pressing
CAL
button, it stands for no data can be cleared or
SD card isn’t being inserted.
NOTE 2:
Once clear the data by long press
CAL
, there is no way to recover the data. If you want to
keep the previous data, rename the file “
MANUAL.csv
” in
/
DOH-10
/ MANUAL.csv
is required.
4.
Data directory in SD card :
/
DOH-10
/ MANUAL.csv
NOTE :
When manual data records full (199 points), logging will continue, but with new data overwriting
old. If you want to keep the previous data, rename the file “
MANUAL.csv
” in
/
DOH-10
/
MANUAL.csv
is required.
TRANSFERRING SD DATA TO PC
a)
Remove SD card from the meter.
b)
Insert SD card directly into a PC SD card slot or use a SD card reader.
c)
Open the saved documents (CSV.) (Data stored) in the folder from PC.
d)
File name /Product number/ Sample rate/ Recording point/ Start recording time/ End recording time/ Recording
date/time /Recording parameters will be shown in the CSV. file.
e)
Data show “-49” stands for no measured value during recording period.
Manual Datalogging
A
uto
Datalogging
