11
4. Re-power
on
the meter to back to normal measurement mode.
NOTE:
To escape setting by turning
off
the meter without any change.
b) Setting the datalogger sampling rate
1. While meter is power
on
, press and hold
MODE
button to enter setting.
2. Press
HOLD
button to increase the value ; press
ADJ
button to decrease the
value.
3. Long press
MODE
button to save setting.
4. The available settings are: 2 sec, 5 sec, 10 sec, 15 sec, 30 sec, 60 sec, 120 sec, 300 sec, 600 sec, 900 sec, 1800 sec, and
1hr.
c)
Start datalogging
Warning:
SD recording the selected temperature unit (
℃
or
℉
). If changing the temperature unit
during the datalogging sessions, the recorded data will be switched into the selected temperature unit.
1. After inserting the SD card, display will show icon “Logging” on the bottom of the screen.
2. Long press
ADJ
button to starts recording until icon “
Logging
” flashing on the bottom of screen.
3. When “
-Sd-
” disappear, SD stop to record data or SD card is not being inserted.
4. When an SD card is used for the first time ,a folder is created on the card and named with the
model number
. Under
the MODEL number folder, the MODEL number and
AUTO+YEAR
folder will be automatically created.
e.g.:
/
DOH-10
/AUTO2017/…..
5.
When starts datalogging, a new folder named
M(month)/D(date)/H(hour)/M(minute)
is created on the SD card in
the
AUTO+YEAR
folder. At the same time, a new spreadsheet document (CSV.) named M/D/H/M is also created
under its
folder.
e.
g.: /
DOH-10
/AUTO2017/04051858/04051858.csv
6.
Each CSV. file can be stored up to 30,000 points.
Once 30,000 points are stored, a new file name will be auto created as
M/D/H/M
right after the last recording time.
Unless you interrupt recording, this process continues in the initial created M/D/H/M folder.
e.g.: /
DOH-10
/AUTO2017/12261858/12262005.csv
NOTE1:
Datalogging stopped when replacing the electrode or removing the SD card or resetting the
sampling rate.
NOTE2:
When the recording is been stopped, a new folder will be created as M/D/H/M from the next datalogging.
NOTE3:
When the recording year and model number is changed, the new folder will be also created
accordingly.
Month Date
Hour
Minute
