Programming Automatic Rearming:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed and
released fifteen times. The system’s response will be fifteen siren chirps, and
the Status Light flashing fifteen times, pausing, then repeating. Within 10
seconds, press and release the transmitter’s Large Upper Button to turn on
the Automatic Rearming feature (the siren will chirp once) or the Small Lower
Button to
turn the Automatic Rearming feature off (the siren will chirp twice).
Feature #16 Doors Lock With Automatic Rearm
(Factory Default Setting On)
This feature adds the automatic locking of the doors to the previous
feature, Automatic Rearming. If this feature is turned on, the doors will lock
when the system rearms itself 90 seconds after being disarmed by the
transmitter. Feature #15 must be turned on for this feature to operate.
Programming Doors Lock With Automatic Rearming:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released sixteen times. The system’s response will be sixteen siren
chirps, and the Status Light flashing sixteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter’s Large Upper Button
to turn this feature on (the siren will chirp once) or the Small Lower Button to
turn this feature off (the siren will chirp twice).
Feature #17
3 / 45 Second Arming Delay
(Factory Default Setting 3 Second)
This feature determines how long after the Arming confirmation chirp
that the system becomes fully Armed. The Arming Delay applies to the
system Arming regardless if it occurs from using the transmitter, Last Door
Arming or Automatic Rearming.
Programming 3 / 45 Second Arming Delay:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released seventeen times. The system’s response will be seventeen siren
chirps, and the Status Light flashing seventeen times, pausing, then repeat-
ing. Within 10 seconds, press and release the transmitter’s Large Upper
Button to configure the system with a 3 second Arming Delay (the siren will
chirp once) or the Small Lower Button to
configure the system with a 45 second
Arming Delay (the siren will chirp twice).
Page 29
Page 30
Feature #18
Doors Lock When Ignition Is Turned On
(Factory Default Setting On)
This feature configures the system to automatically lock the vehicle’s
doors every time that the ignition switch is turned on. An exception to this
would be if feature #21 is turned on, and a door being open when the ignition
switch is turned on. The two following features, #19 and #20, control the
automatic unlocking operation.
Programming Doors Lock When Ignition Is Turned On:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released eighteen times. The system’s response will be eighteen siren
chirps, and the Status Light flashing eighteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter’s Large Upper Button
to turn on “Doors Lock When Ignition Turned On” (the siren will chirp once)
or the Small Lower Button to
turn this feature off (the siren will chirp twice).
Feature #19
Unlock #1 When Ignition Is Turned Off
(Factory Default Setting On)
This feature configures the system to automatically unlock the vehicle’s
doors every time that the ignition switch is turned off. An exception to this
would be if feature #21 is turned on, and a door being open when the ignition
switch is turned off. If the system is installed without the Driver’s Door
Priority unlock interface, this feature unlocks all of the doors when the
ignition switch is turned off. If Driver’s Door Priority is installed, this feature
controls the driver’s door only, and the following feature will control the
automatic unlocking of the other doors.
Programming Unlock #1 When Ignition Is Turned Off:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released nineteen times. The system’s response will be nineteen siren
chirps, and the Status Light flashing nineteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter’s Large Upper Button
to turn on “Unlock #1 When Ignition Turned Off” (the siren will chirp once)
or the Small Lower Button to
turn this feature off (the siren will chirp twice).
